Introduction
Building my own home from the ground up was an extremely rewarding experience. I learned many valuable lessons, one of which was that different steps require different mindsets.
One step I wasn't initially excited about but eventually learned to love was milling and installing my own solid wood trim around windows and doors. The work wasn't as fast-paced as building the foundation or framing the walls. But it certainly led to a great sense of accomplishment, along with visually stunning results.
If your home is in need of some trim work, consider milling and installing your own from solid wood. It's much cheaper than ready-milled trim, and the method I'm about to share is simpler than typical trim carpentry. Keep reading to learn how you can take on the job of working with trim wood, using the right tools and know-how.
Tools Required
Materials Required
- 1 1/4-inch 23-gauge pin nails (optional)
- 1-1/4-in. long fine thread pocket screws (two for each corner)
- 1x6 lumber of your chosen species (3/4- x 5-1/2-in. actual dimensions)
- 2-inch 23-gauge pin nails (optional)
- 5-inch 80-grit sanding discs
- Caulking tube of silicone
- Finishing nails (if you don't have a pin nailer)
- Sheets of 120 and 180-grit sandpaper
- Shop rag or paintbrush (depending on what sort of finish you choose)
- Wood stain/finish of your choice
ncG1vNJzZmivp6x7p63MoqOyoJGjsbq5wKdlnKedZL2zu8memq1npKe2rnnWqKadZw%3D%3D